IBC tote accessories & parts — because a five-dollar gasket saves a whole tote.
Valves, caps, gaskets, adapters, cages, pallets, and covers for 275 & 330 gallon totes. The unglamorous parts that turn a leaking, retired tote back into a working one — which is about the most sustainable thing you can buy.
Repair is the greenest purchase in the catalog
A worn valve or cracked pallet does not mean a dead tote. Swap the part, keep the container, and you have just prevented ~120 pounds of HDPE and steel from becoming a problem.
Extend, do not replace
One new gasket or valve can add years of service to an otherwise sound tote. Least waste, lowest cost, best math.
Keep the loop turning
Every repaired tote is one that never had to be re-manufactured or land-filled. Small parts, big diversion.
Fitment you can trust
Standard IBC threads (S60x6, 6in fill) and 40×48 footprints mean our parts drop into the totes you already own.
What we stock
The common wear items and upgrades for 275 & 330 gallon totes. Not sure which fitting you have? Send a photo and we will identify it.
| Part | Common sizes / types | Typical use |
|---|---|---|
| Butterfly valve | 2 in (DN50), S60x6 outlet thread | Standard bottom-drain replacement |
| Ball valve | 2 in, brass or polypropylene | Positive shut-off for viscous or valuable liquids |
| Cap / lid | 6 in (150 mm) fill cap, vented or solid | Top fill opening — seal or de-gas contents |
| Outlet cap | S60x6 (63 mm) dust cap | Protects the valve outlet in transit |
| Gaskets & seals | EPDM, Viton, silicone | Leak-proofing valves and lids by chemical type |
| Adapters & fittings | Camlock, garden hose (GHT), NPT, DIN | Connect hoses, pumps, and irrigation |
| Replacement cage | Galvanized steel, 275 / 330 gal | Restore stackability and forklift safety |
| Pallet | Composite or wood, 40 × 48 in | Hygienic (composite) or general-duty (wood) base |
| Heaters & jackets | Wrap-around electric, insulated covers | Keep contents flowing in cold weather |
| Covers & UV wraps | Blackout / UV-blocking covers | Protect light-sensitive contents outdoors |
Full thread and dimension references are on the Size Chart & Specs.
Pick the part, extend the life
Valves
The number-one wear item. Replace a seeping 2in butterfly valve or upgrade to a ball valve for positive shut-off on high-value liquids.
Caps & lids
6in fill caps and S60x6 outlet caps, vented or solid. Vented lids protect the bottle from pressure and vacuum on off-gassing contents.
Gaskets & seals
Match the elastomer to the chemistry — EPDM for water and mild solutions, Viton for aggressive chemicals, silicone for food and heat.
Adapters & fittings
Camlock, garden-hose, and NPT adapters that turn a plain outlet into an irrigation feed, a pump connection, or a fill station.
Cages & pallets
A refurbished galvanized cage or fresh 40×48 pallet restores a structurally tired tote to full shipping and stacking compliance.
Heaters & covers
Wrap-around heaters and insulated jackets keep viscous or freeze-prone contents flowing; UV covers protect what the sun would spoil.
When to repair, and when to trade up
We would rather sell you a gasket than a tote you do not need — but sometimes a fresh container is the smarter move. Here is how we think about it.
- The bottle is sound — no cracks, bulging, or UV crazing.
- Only the valve, gasket, cap, or cage needs attention.
- The prior contents match your intended reuse.
- You want the cheapest, lowest-carbon fix available.
- The bottle itself is cracked, brittle, or contaminated.
- You need a documented grade change the old bottle cannot meet.
- Multiple systems are failing at once — a rebottle is cheaper.
- The tote is genuinely retired — send it to us for upcycling.
Then look at reconditioned totes or give a tired tote a second life.
Know your threads before you order
Most IBC parts fail to fit for one reason: a thread mismatch. The good news is that totes use a small set of standard openings, so once you know yours, ordering is easy.
The S60x6 outlet
The buttress thread on the bottom outlet where the valve screws on — about 63 mm across. Most 275 and 330 gallon totes share it, which is why a standard 2 in butterfly valve drops right in.
The 6 in fill lid
The 150 mm screw cap on top. Vented versions relieve pressure and vacuum on off-gassing or fast-pumped contents; solid caps seal tight for storage.
The 2 in valve bore
Standard bottom-drain valves are 2 in (DN50). Adapters step this down to camlock, garden-hose (GHT), or NPT so you can connect hoses, pumps, and irrigation.
Match the elastomer
A gasket only seals if the rubber survives your chemistry — EPDM for water, Viton for aggressive chemicals, silicone for food and heat.
Cage & pallet size
Replacement cages and 40 × 48 in pallets are sized to the tote capacity. Confirm 275 vs 330 so the frame and base line up.
When in doubt, send a photo
Not sure which thread or fitting you have? Send a photo of the outlet and lid and we will identify it and confirm fitment before you buy.
Which gasket for which contents
The single most common repair is a leaking seal — and the single most common mistake is fitting the wrong rubber. Match the elastomer to your contents and the fix lasts.
| Elastomer | Handles well | Avoid with |
|---|---|---|
| EPDM | Water, mild acids & bases, many food liquids | Oils, fuels, aggressive solvents |
| Viton (FKM) | Solvents, fuels, acids, oils | Hot water and steam, some ketones |
| Silicone | Food contact, high & low temperatures | Concentrated acids, hydrocarbons |
| Buna-N (Nitrile) | Oils, greases, fuels | Strong oxidizers, ozone exposure |
| PTFE | Nearly all chemicals, broad range | Jobs needing an elastic, forgiving seal |
Not certain what your contents call for? Describe them in the quote form and we will spec the right seal.
Why a small part is the biggest win
IBC parts & accessories FAQ
How do I identify my tote's valve thread?
Can I replace a valve myself?
What gasket material should I use?
Do you sell replacement cages and pallets separately?
What adapters connect a tote to a garden hose or pump?
When is it not worth repairing a tote?
Related pages
Need a part to bring a tote back to life?
Tell us the tote size and the part — or send a photo of the fitting you are trying to match — and we will confirm fitment and quote by email within a business day.